A pulse train is shown on the oscilloscope below? Determine the period of the pulse.
The accompanying figure above is a multisim pop up screen for an Oscilloscope labeled with XSC1. The figure consists of two portions. The top portion of the figure is the black display screen with 6 X 12 grey grids. The bottom portion of the figure is the control panel along with the currents settings and readings. The top display of the oscilloscope shows a 2 division high peak-to-peak “non ideal” square wave with identifiable slope on the rise and fall times.
The period of this waveform occupies approximately 4.67 divisions wide.
Towards the far left of the screen, there is a blue triangle with a hanging line to indicate a start and stop measuring point on the time scale.
Towards the far left of the screen (at the end of division 12), there is a yellow small triangle with hanging blue lines to indicate a start and stop measuring point on the time scale.
These two points are called movable markers, so we can see the displayed measured values.
The settings on the bottom portion of the oscilloscope display shows the following values:
Place an order with us. Our skilled and experienced writers will deliver a custom paper which is not plagiarized within the deadline which you will specify.
Note; 6 Hours urgent orders deliver also available.
If you need more clarifications contact our support staff via the live chat for immediate response. Use the order calculator below and get ordering with wishessays.com now!
TRY OUR SERVICES TODAY.[order_calculator]